Summary

• A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco Webex Room Phone and Cisco Webex Share devices could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.

  This vulnerability is due to insufficient resource allocation. An attacker could exploit this vulnerability by sending crafted LLDP traffic to an affected device. A successful exploit could allow the attacker to exhaust the memory resources of the affected device, resulting in a crash of the LLDP process. If the affected device is configured to support LLDP only, this could cause an interruption to inbound and outbound calling. By default, these devices are configured to support both Cisco Discovery Protocol and LLDP. To recover operational state, the affected device needs a manual restart.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lldp-memlk-McOecPT

Affected Products

• Vulnerable Products

  At the time of publication, this vulnerability affected the following Cisco products if they were running a vulnerable release of firmware and had the LLDP feature enabled. The LLDP feature is enabled by default.

  • Webex Room Phone
  • Webex Share

  For information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

Workarounds

• There are no workarounds that address this vulnerability. However, there is a mitigation that addresses this vulnerability for deployments that support both Cisco Discovery Protocol and LLDP for neighbor discovery. Administrators may disable LLDP on affected devices. Devices will then use Cisco Discovery Protocol for discovery of configuration data such as voice VLAN, power negotiation, and so on. This is not a trivial change and will require diligence on behalf of the enterprise to evaluate any potential impact to devices as well as the best approach to deploy this change in their enterprise.

  While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

Fixed Software

• When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Fixed Releases

  At the time of publication, the release information in the following tables was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.

  The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability that is described in this advisory and which release included the fix for this vulnerability.

  Cisco Webex Room Phone and Cisco Webex Share Firmware Release	First Fixed Release
  1.2.0 and earlier	1.2.0SR3

  The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.

Exploitation and Public Announcements

• The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• Cisco would like to thank Qian Chen of the Codesafe Team of Legendsec at QI-ANXIN Group for reporting this vulnerability.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lldp-memlk-McOecPT

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	-	Final	2023-JAN-11

  Show Less