Summary

• A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, low-privileged, local attacker to execute arbitrary commands on the underlying operating system of an affected device.

  This vulnerability is due to insufficient validation of arguments for a specific CLI command. An attacker could exploit this vulnerability by including crafted input as the argument of the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-nxos-cmdinj-Lq6jsZhH

  This advisory is part of the August 2024 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: August 2024 Semiannual Cisco FXOS and NX-OS Software Security Advisory Bundled Publication.

Affected Products

• Vulnerable Products

  At the time of publication, this vulnerability affected the following Cisco products if they were running a vulnerable release of Cisco NX-OS Software, regardless of device configuration:

  • Nexus 3000 Series Switches (CSCwh77786)
  • Nexus 9000 Series Fabric Switches in ACI mode (CSCwi48264)
  • Nexus 9000 Series Switches in standalone NX-OS mode (CSCwh77786)
  • UCS 6400 Series Fabric Interconnects (CSCwi48276)
  • UCS 6500 Series Fabric Interconnects (CSCwi48276)

  For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect the following Cisco products:

  • Firepower 1000 Series
  • Firepower 2100 Series
  • Firepower 4100 Series
  • Firepower 9300 Security Appliances
  • MDS 9000 Series Multilayer Switches
  • Nexus 1000 Virtual Edge for VMware vSphere
  • Nexus 1000V Switch for VMware vSphere
  • Nexus 5500 Platform Switches
  • Nexus 5600 Platform Switches
  • Nexus 6000 Series Switches
  • Nexus 7000 Series Switches
  • Secure Firewall 3100 Series
  • Secure Firewall 4200 Series
  • UCS 6200 Series Fabric Interconnects
  • UCS 6300 Series Fabric Interconnects

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Cisco NX-OS Software

  To help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories that the Software Checker identifies (“Combined First Fixed”).

  To use the tool, go to the Cisco Software Checker page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:

  1. Choose which advisories the tool will search-only this advisory, only advisories with a Critical or High Security Impact Rating (SIR), or all advisories.
  2. Choose the appropriate software.
  3. Choose the appropriate platform.
  4. Enter a release number-for example, 7.0(3)I7(5) for Cisco Nexus 3000 Series Switches or 14.0(1h) for Cisco NX-OS Software in ACI mode.
  5. Click Check.

  
  

  Only this advisory All Critical and High advisories All advisories Cisco NX-OS Software Cisco NX-OS Software in ACI Mode Any Platform MDS 9000 Series Multilayer Switches Nexus 1000V Series Switches Nexus 3000 Series Switches Nexus 5000 Series Switches Nexus 6000 Series Switches Nexus 7000 Series Switches Nexus 9000 Series Switches

  
  

  Cisco UCS Software

  At the time of publication, the release information in the following table was accurate. See the Details section in the bug ID at the top of this advisory for the most complete and current information.

  The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerabilities described in this advisory and which release included the fix for these vulnerabilities.

  UCS 6400 and 6500 Series Fabric Interconnects

  Cisco UCS Software Release	First Fixed Release
  4.1 and earlier	Not vulnerable
  4.2	4.2(3k)
  4.3	4.3(4a)

  The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.

  Additional Resources

  For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.

  Cisco MDS Series Switches
  Cisco Nexus 1000V for VMware Switch
  Cisco Nexus 3000 Series Switches
  Cisco Nexus 5500 Platform Switches
  Cisco Nexus 5600 Platform Switches
  Cisco Nexus 6000 Series Switches
  Cisco Nexus 7000 Series Switches
  Cisco Nexus 9000 Series Switches
  Cisco Nexus 9000 Series ACI-Mode Switches

  To determine the best release for Cisco UCS Software, see the Recommended Releases documents in the release notes for the device.

Exploitation and Public Announcements

• The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing by Stephen Kubik of the Cisco Advanced Security Initiatives Group (ASIG).

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-nxos-cmdinj-Lq6jsZhH

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	-	Final	2024-AUG-28

  Show Less